THE BEST CLIMATE FOR RIDING FACILITIES AND THE HEALTH OF HORSES

Gigola & Riccardi S.p.A. has over 30 years of experience in manufacturing products for animals and expecially for horses.

We know the importance of providing the right climate in a horse facility since a correct ventilation is the key factor to avoid the excessive heat that is often too heavy, in particular during hot summers.

It is proven that animals living in the correct climate conditions avoid health problems and have higher conception rates and lower respiration rates.

It’s very important to avoid heath stress for animals, this way increasing the overall health of the horse facility.

Many horse riders have chosen our products because they are the best solution for horse ventilation, having the following key features:

Resistant to corrosion, water infiltrations, moisture, dirt. They will succed where a standard fan fails. Ideal for animal breedings.

– Our fans are far below admitted noise levels. (Please see user’s manual for further indications).

– Our fans have been designed and developed to optimize the energy efficiency so that you will have energy savings in comparison to standard fans.

PRODUCTS FOR RIDING FACILITIES AND THE HEALTH OF HORSES

Box Circulation Fans

POULTRY, DAIRY, CIRCULATION FANS, SWINE/HOGS, GREENHOUSES, INDUSTRIAL, GARMENTS, WINERY, HORSES, GRAIN STORAGE, PADEL COURTS, MEDICAL CANNABIS

Circulation Fans with Steel Blades & Galvanized Housing

Our circulation fans provide uniform temperature throughout your tunnel, greenhouse or commercial warehouse.

With our circulation fans you will reduce heat stress, improve plants and animals production levels, eliminate condensation on ceilings and walls, keep buildings fresher and improve the comfort of your workers.

EOLOSTAR SERIES

MODELS:

ES - 200 R/R - 69''
ES - 150 R/R - 55''
ES - 140 R/R - 51''
ES - 120 R/R - 39''
ES - 100 R/R - 31''
ES - 80 R/R - 26''

MAIN FEATURES

EASY MOTOR UNASSEMBLY

Our new motor support arm allows the motor to be unassembled quickly without removing the pulley.

AISI 304 STAINLESS STEEL VERSION AVAILABLE

Ideal for very hard enviroments such as pigs and hogs breeding farms, our AISI 304 stainless steel fan is even more resistant to corrosion. It is available for the following dimensions: 100 and 140.

MOPLEN VENTURI NOZZLE

The moplen Venturi nozzle is very strong and provides easy installation and maintenance. It’s easy to clean and it’s not subject to corrosion.

STAINLESS STEEL BLADES

Very resistant to corrosion, our blades last much longer than galvanized blades.

“X” SUPPORT STRUCTURE

The fan structure has the particular “x” shape to provide more robustness and to reduce vibration. It is made of triangular profile tube for an increased strength.

CUSTOMIZABLE NOZZLE COLOURS

The moplen Venturi nozzle can be customized with the clients company colour to obtain a unique custom product (for 500 + pieces orders).

DOUBLE BEARING

In order to achieve a better balance our fans are equipped with two bearings, instead of one. The two bearings are separated by a distantial.

DOWNLOAD BROCHURE

FOR MORE INFORMATION OR QUOTATION FOR THIS PRODUCT

Cross Circulation Fans

CIRCULATION FANS, DAIRY, INDUSTRIAL, GARMENTS, HORSES, GRAIN STORAGE, PADEL COURTS

Cross Circulation Fans

Gigola & Riccardi S.p.A. is proud to announce the launch of the new Cross Fan.

The new series is called X-Fan and is available in 2 different sizes.

X-Fans are particularly addressed to cow barns and industrial plants and allow very high energy savings thanks to the low energy consumption.

The system is the perfect choice to provide ventilation and to enlower heat stress. It can be operated to provide new fresh air and works perfectly in combination with HVLS fans.

The system is Industry 4.0 ready and can be used to apply for government incentives*.

Our sales team will be happy to give you any further explanation you may require.

*This statement is valid according to the current Italian legislation. Each customer shall check specifications valid in the country in which the fans are installed.

X-FAN SERIES

MODELS:

XF - 1200/47''
XF - 1000/39''

MAIN FEATURES

HIGH EFFICIENCY MOTO-INVERTER BRUSHLESS

EC Brushless IP65 50/60Hz motor with inverter.
High efficiency and low running costs thanks to the absence of gears which guarantees very low noise.

EASY VERTICAL ADJUSTMENT

The frame allows a flow angle adjustment of +/- 45° which guarantees an easy positioning of the airflow in the desired area.

SIMPLE HORIZONTAL ORIENTATION

The hooking system on the frame facilitates installation by allowing the fan to be turned horizontally at 360°.

PLUG AND PLAY CONNECTORS

Quick-fit plug and play connectors for fast and easy installation

RELIABLE ELECTRONIC BOARD

Integrated electronic board equipped with overcurrent, overtemperature and overvoltage protection. The card includes EMI / EMC filters capable of eliminating possible electromagnetic interference with other systems (e.g. pedometers, etc.).

SAFETY GRIDS (OPTIONAL)

Installation for height under 2.7 meters in height, the fan must be equipped with a safety net.

STAINLESS STEEL STABILIZERS (OPTIONAL)

3 cables to improve stability and vibration dampering.

HIGH PERFORMANCE AND CORROSION RESISTANT BLADES

3 blades with high-performance wing profile in fiberglass reinforced nylon.

DOWNLOAD BROCHURE

FOR MORE INFORMATION OR QUOTATION FOR THIS PRODUCT

Destratification Fans

POULTRY, CIRCULATION FANS, DAIRY, GREENHOUSES, INDUSTRIAL, GARMENTS, HORSES, GRAIN STORAGE, PADEL COURTS, MEDICAL CANNABIS

Destratification Fans for breeding farms, greenhouses and industrial applications

Our destratificator has the aim to reduce the temperature difference between the ceiling and the floor of the building.

Hot air is moved by the destratificator downwards and can be extracted from the building. This way air stagnation problems can be avoided.

DESTRATIFICATION FANS

MODELS:

ES 470 – 20”

DOWNLOAD BROCHURE

FOR MORE INFORMATION OR QUOTATION FOR THIS PRODUCT

HVLS Fans

DAIRY, HLVS FANS, INDUSTRIAL, GARMENTS, HORSES, GRAIN STORAGE, PADEL COURTS, FITNESS CENTERS

HVLS Ceiling Destratification Fans

Our circulation fans provide uniform temperature throughout your tunnel, greenhouse or commercial warehouse. With our circulation fans you will reduce heat stress, improve plants and animals production levels, eliminate condensation on ceilings and walls, keep buildings fresher and improve the comfort of your workers.

Gigola & Riccardi S.p.A. is proud to announce the launch of the new HVLS Ceiling Destratification Fans.

The new series is called Hurricane and is available in 3 different sizes.

Hurricane fans are particularily addessed to cow barns and industrial plants and allow very high energy savings thanks to the low energy consumption.

In summer time the system is the perfect choice to provide ventilation and to enlower heat stress. In winter times it can be operated to enlower the heat that naturally tends to raise against the ceiling.

The system is Industry 4.0 ready and can be used to apply for government incentives*.

Our sales team will be happy to give you any further explaination you may require.

*This statement is valid according to the current italian legislation. Each customer shall check specifications valid in the country in which the fans are installed.

HURRICANE SERIES

MODELS:

HUR - 4000/13'
HUR - 5000/16.5'
HUR - 6000/20'

MAIN FEATURES

HIGH EFFICIENCY MOTO-INVERTER BRUSHLESS

EC Brushless IP65 50/60Hz motor. High efficiency and low running costs thanks to the absence of gears which guarantees very low noise.

MODULAR FRAME

Modular frame in structural steel without welds, easily assembled with high rigidity, allows easy access to the electronics for maintenance.

PLUG AND PLAY CONNECTORS

Quick-fit plug and play connectors for fast and easy installation.

REDUNDANT SAFETY SYSTEMS

Fall arrest safety system with decoupling of the impeller from the hub.

RELIABLE ELECTRONIC CARD

Integrated electronic card equipped with overcurrent, overtemperature and overvoltage protection. The card includes EMI / EMC filters capable of eliminating possible electromagnetic interference with other systems (e.g. pedometers, etc.).

STAINLESS STEEL STABILIZERS

4 rods to improve stability and vibration dampering.

HIGH PERFORMANCE AND CORROSION RESISTANT BLADES

6 blades with high-performance wing profile in anodized Anticorodal EN-AW-6063T66 aluminum for high resistance to corrosion.

DOWNLOAD BROCHURE

FOR MORE INFORMATION OR QUOTATION FOR THIS PRODUCT

Controllers

POULTRY, DAIRY, SWINE/HOGS, GREENHOUSES, INDUSTRIAL, GARMENTS, WINERY, CONTROLLERS, HORSES, GRAIN STORAGE, PADEL COURTS, MEDICAL CANNABIS, FITNESS CENTERS

Controllers

Our products are developed in our proprietary laboratory, called GigoLAB, located in Cazzago San Martino (BS).

GigoLAB is an innovative laboratory for studying and developing axial fans equipped with a modern testing bench built in compliance with ISO 5801 and AMCA 210 rules.

The lab also includes a testing bench for evaporative pads cooling efficiency and pressure drop tests aside from an ageing chamber to test resistance to sunrays and rainfall.

TOP FARM SERIES

MODELS:

GR - C20
GR - C21
GR - C22
GR - C23
GR - C30
GR - C40 2LI
GR - C41 4LI
GR - C42 2LR
GR - C43 4LR
GR - C44 24LR

MODELS

GR - C40 2LI

• Automatic ventilation control 0-10V
• Temperature alarm
• Manual ventilation control 0-10V
• Anemometrical block
• 1 GR-C30 controller integrated
• Advanced features of remote connectivity

GR - C41 4LI

• Automatic ventilation control 0-10V
• Manual ventilation control 0-10V
• Anemometrical block
• Temperature alarm
• 2 GR-C30 controllers integrated
• Advanced features of remote connectivity

GR - C42 2LR / GR - C43 4LR

• Automatic ventilation control 0-10V
• Manual ventilation control 0-10V
• Auxiliary ventilation ON / OFF
• Automatic Misting System control up to 4 times
• Manual Misting System control
• Stops ventilation when Misting System is activated
• 1 or 2 GR-C30 controllers managed depending on the model chosen
• Advanced features of remote connectivity

GR - C44 24LR

• Automatic ventilation control 0-10V
• Manual ventilation control 0-10V
• Auxiliary ventilation ON/OFF
• Automatic Misting System control
• Manual Misting System control
• Display of Temperature / Humidity (THI)
• Stops ventilation when Misting System is activated
• Up to 12 GR-C30 controllers managed
• Advanced features of remote connectivity

GR - C20

• Automatic ventilation control 0-10V
• Manual ventilation control 0-10V
• Anemometrical block
• Temperature alarm
• Up to 20 fan per lines

GR - C21

• Automatic / manual control of 2 lines of fans 0-10V and ON / OFF
• Anemometrical block
• Temperature alarm
• Up to 20 fan per lines

GR - C22

• Automatic ventilation control 0-10V
• Manual ventilation control 0-10V
• Auxiliary ventilation ON / OFF
• Automatic Misting System control up to 4 times
• Misting System manual control
• Stops ventilation when Misting System is activated
• Up to 20 fan per lines

GR - C23

• Automatic ventilation control 0-10V
• Manual ventilation control 0-10V
• Auxiliary ventilation ON / OFF
• Automatic Misting System control
• Manual Misting System control
• Display of Temperature / Humidity (THI)
• Stops ventilation when Misting System is activated
• Up to 20 fan per lines

GR - C30

• Automatic control of 2 lines of fan 0-10V
• Manual control of 2 lines of fan 0-10V
• Auxiliary ventilation ON/OFF
• Automatic Misting System control up to 4 times
• Manual Misting System control
• Stops ventilation when Misting System is activated
• Modbus data communications protocol
• Up to 20 fan per lines

ACCESSORIES

TEMPERATURE SENSOR

ANEMOMETER

Safety device that turn off the fan.

HUMIDITY SENSOR

CONTROL PANEL

Control panel ready to install capable of managing 2 lines composed up to 15 fans per line (depending on model chosen).

  • Included 1 Power consumption analyzer
  • Included 1 C30 controller

DOWNLOAD BROCHURE

FOR MORE INFORMATION OR QUOTATION FOR THIS PRODUCT

FOR MORE INFORMATION OR QUOTATION ABOUT OUR PRODUCTS